Home      Convair B-58 Hustler

Convair B-58 Hustler

YOU TUBE - Convair B-58 Hustler


        Primary Function:
        Weight Empty:
        Max. Weight:
        Cruise Speed:
        Max. Speed:
        Climb Rate:
        First Flight:
        Year Deployed:
GE J79
4x 15,600 lbs. ea.
96 ft. 10 in.
56 ft. 10 in.
55,560 lbs.
176,900 lbs.
1- 20 mm
95,760 lbs.
610 mph
1,325 mph
38,000 fpm
64,800 feet
4,400 miles

Convair B-58 Hustler
Click on the photo to hear the wav sound.

The Convair B-58 Hustler was designed as a supersonic replacement for U.S. Air Force aging bombers. Its first flight was on Nov. 11, 1958. It went supersonic for the first time on Dec. 30, 1958. It was deployed with the Strategic Air Command in 1960 to become the world's first operational supersonic bomber.

Great technological advances had to be made for the Convair design team to meet the exacting requirements to produce a supersonic bomber aircraft. It had to fly at twice the speed of sound, at high altitudes, and be able to deliver nuclear weapons accurately to their targets. The aircraft was designed to be as small as possible to have a minimal radar signature.

For the first time the U.S. Air Force saw a bomber as an entire weapons system. It was the job of Convair to bring it all together. This new approach to weapons procurement meant that numerous new procedures needed to be initiated. It lead to development delays.

Convair B-58 Hustler technical features included double redundant flight system hydraulics, titanium fasteners, movable cones fitted to engine intakes, advanced avionics including radar targeting, navigation, and electronics counter measures. It was the first aircraft to have light weight, heat-resistant stainless steel honeycomb sandwich skin panels in its wings and fuselage. It was the first bomber designed to have a weapons pod that would be jettisoned after use, and the first supersonic aircraft with engine pods mounted outboard on a thin delta wings which were swept rearward at a sixty degree angle.

The Convair B-58 Hustler crew of three consisted of a pilot, navigator, and defensive systems operator. Seating was in tandem. Because ejection seats of the time would not protect those ejecting at supersonic speeds, each crew member had a separate ejection pod. The pods were capable of use at supersonic speeds at altitudes up to 70,000 feet.

It was possible for each crew member to activate airtight bulkheads withing the cockpit. Each crew member area was individually pressurized and had its own oxygen system. Crew members could choose to eject separately, or stay with the aircraft while being protected in the pod until aircraft control was regained at a safer speed and altitude.

The pilot's pod held all the necessary equipment to control the aircraft. After ejection, the pods would be lowered by parachute all the way to the ground. The pods contained shock absorbers to help cushion landings. The pods also could float in the event of a water landing with flotation bags deployed.

The Convair B-58 Hustler was at the leading edge of technology for its time. Because of this, the flight crew had to devote their full attention to aircraft systems. Particular attention had to be paid to flight trim as fuel was consumed. Flight protocols during take off and landings had to be followed rigidly or an aircraft could be lost.

A centerline weapons pod was fitted to the Convair B-58 Hustler. Its narrow fuselage could not accomodate a bomb bay. Included in the weapons pod, in addition to bombs, was a fuel tank. Provisions were also available to carry a surface to air missle, or reconnaissance equipment. Long landing gear struts were necessary to raise the aircraft sufficiently from the ground to provide for weapons pod clearance. For short range missions, the weapons pod could be removed, and up to four bombs could be carried beneath the wings. This had a great effect on overall aircraft performance. Without a load, the aircraft had superior speed, an excellent climb rate, and good maneuverability. Hanging fuel and weapons below the fuselage and wings took away these advantages.

Although the Convair B-58 Hustler had a slightly longer range than its predecessor, it required in-flight refueling to reach targets inside the Soviet Union, unless it was stationed at a forward air base and the target was within its range.

The Convair B-58 Hustler set a number of speed records, flying for up to twenty hours at a time with in-flight refueling. The purpose of the record setting missions were two fold. In addition to highlighting its high speed performance, they were meant to show the Soviet Union that none of its strategic basis were out of the aircraft's range.

The Soviets countered the threat by building high flying, accurate, ground to air missiles. That necessitated the B-58 having to fly at low levels, beneith Soviet radar, resulting in increased fuel consumption and shorter range.

A total of 86 Convair B-58 Hustler aircraft were deployed with the Strategic Air Command from 1960 to 1970. Some 116 Convair B-58 Hustler aircraft were produced in all, including 30 prototype and test pre-production aircraft. Of the bombers produced, 26 were lost and thirty six crew members lost their lives.

Convair B-58 Hustler
Convair B-58 Hustler

Pictured above and immediately below is the beautiful Convair B-58 Hustler scratch built by Lynn McCauley and Butch Sickels. It is 1/9 scale and has a wingspan of 78", with a 127" length. Four O.S. ducted fans are used for power. All up weight for the B-58 Hustler is about 46 lbs. and total static engine thrust is 28 lbs.

Convair B-58 Hustler

Convair B-58 Hustler

The Convair B-58 Hustler built by Larry from RCModel Maker is 1/24 stand-off scale with a 43” wingspan and weight of about 6.5 lbs. Power comes from four Razor 2500 motors driving WeMoTec Micro Fans.

Convair B-58 Hustler

The Convair B-58 Hustler built from a kit at Park Flyer Plastics has a wingspan of 40" with a length of 67" and weighs about 4 lbs. Power can come from two pusher props or 55 mm ducted fans.

Jim "Texasrcflying" Caton jmcaton @ earthlink. net writes: "I have a set of hand drawn drawings I did for a Convair B-58 Hustler. Wing spread is about 45 inches and the length is about 60 inches. That is what will fit in the back of my Explorer. I have the skeleton of the fuselage and the wings done. The Convair B-58 Hustler is on hold presently because I am doing a Bobcat with twin EDF motors similar to what I hope will fly the B-58. Hustler. I want to complete the Bobcat as a test bed for the electric ducted fan motor set up. I should be ready for a "roll it across the garage floor" test in about a week. BVM's EVF systems and turbines are out of my budget range, so I building my own EDF. I am using a Wattage power fan 400 six blade fan with a 57 mm diameter housing. I will be powering the fan with a Little Screamer electric motor from Hobby Lobby that has a Kv of 5,400. I plan to use a LiPo 3 cell at 2100 mAh or more. The battery size will be determined by weight as I get to that point. Each motor for the Convair B-58 Hustler will have its own battery and ESC.  If this setup flies the Bobcat at 5 pounds, then the Convair B-58 Hustler will become my top priority. This is a quick bit of information. I would love to hear from someone interested in the project. I know I will have lots of questions if I get to go on with the project. Thanks, Jim "Texasrcflying" Caton."  Thank you for telling us about your project, Jim.  Hopefully it will generate some interest from our readers.

We received the following from Volker (VKgroebi@aol.com): "Hi friends. For years I am planning to realize a Convair B-58 Hustler model of this beauty; well it will probably take another few years before it will get off the ground. Since also for me small turbines are financially out of reach I will go for ducted fans as well.  My Convair B-58 Hustler will have some 133 cm (52.36 inch) wingspan and 230 cm (90.55 inch) fuselage length. There's a very interesting fan with 60 mm diameter available from Scorpio / Italy which is to be mounted at the rear of the engine nacelles, quite an advantage compared to standard front mounted fans. This company is selling this fan, meaning that this long section in front of the fan should be no problem. For my Convair B-58 Hustler I will go for the Fantex 4xx model. There are many others, selling this fan unit."

Volker - thank you for your email and good luck on your Convair B-58 Hustler project. Volker would appreciate anyone out there with experience building a Convair B-58 Hustler to contact him.

Email us.